Machinery and equipment for the food industry

High pressure filter

The high-pressure filter is used in all those machines operating with air in their system, therefore needing cleaning systems to filter the air before reinserting it in the ambience. For this reason, it is mainly used for pneumatic conveying systems or aspiration systems. 

G&AS filters employ cyclonic settling through the tangential inlet in the first place; then the air passes through a group of filtering sleeves, going from the outside to the inside, thus dropping the dust off on their external surface.

A temporised upstream jet of air cleans cyclically the filtering fabric.

The high-pressure jet filter uses compressed air at 7 bars for the cleaning operation. The air enters through electrovalves and pipelines with entry holes. Each electrovalve can release compressed air to groups from 2 to 7 sleeves at a time. An external tank feeds and connects all the electrovalves.

The high-pressure filter is composed of cylindric elements made of metal sheet, joined together through bolts. It can be flat bottomed, equipped with a motorised extracting impeller or with a discharge cone. The powder is discharged through a star valve that prevents the air from entering the system.

The air goes inside the filter to be processed: the heavy particles of dust go down towards the outlets while the light ones, carried in suspension, are deposited on the external surface of the sleeves, letting only the depurated air pass through. An electrical adjustable temporiser controls the emission of compressed air inside the sleeves, thus causing them to expand, while dust detaches and fall to the bottom of the filter and is therefore discharged through the rotating valve. Upon request the filter can be equipped with certified anti-explosion panels or with flame arrester. 

Several electronic systems are available to control, also remotely, the filter operation.

Operation pressure of the filter ranges from + 0.8 bars to – 0.5 bars.

Operation pressure of the sleeves cleaning system ranges from 6 to 8 bars. 

A pressure gauge constantly checks on every possible pressure drop of the sleeves, showing if they need to be changed or cleaned. Their examination, maintenance and replaceme

As for all G&AS construction machines, when required by functionality, capacity, and footprint requirements, high-pressure filters can be customized in the dimensions, features, and materials used for construction. Sleeves can be extracted from above, the position of the air inlets can be changed, they can have anti-explosion membrane or flame arrester, upon request. The outlet can have a motorized star valve or a quick-change bin to collect dust.
Not found what you are looking for?
We’re at your service